Home › Garden & power tools › Chainsaws › Husqvarna 562 XP® G Mark II
Husqvarna562 XP® G Mark II
Petrol chainsaw. Spare parts with Husqvarna’s own order codes, and the troubleshooting chapter of the operator’s manual.
Photograph: a chainsaw. We hold no photograph of this exact machine, and we would rather say so than pass one off.
What actually breaks
Open the problem that matches yours. Everything inside comes from the troubleshooting chapter of the operator’s manual Husqvarna publishes for this model — a 124-page document we read on 10 September 2026.
The engine does not start 22 lines
Husqvarna sets this out as a table with the columns “Product part to examine”, “Possible cause”, “Action”. We print the lines in the maker’s order.
- Starter pawls
- The starter pawls are blocked.
- Adjust or replace the starter pawls.
- Clean around the pawls.
- Speak to an approved service workshop.
- Fuel tank
- Incorrect fuel type.
- Drain the fuel tank and fill with correct fuel.
- The fuel tank is filled with chain oil.
- If you have tried to start the product, speak to your servicing dealer. If you have not tried to start the product, drain the fuel tank.
- Ignition, no spark
- The spark plug is dirty or wet.
- Make sure that the spark plug is dry and clean.
- The electrode gap is incorrect.
- Clean the spark plug. Make sure that the electrode gap and spark plug is correct, and that the correct spark plug type is the recommended or equivalent.
- Refer to Technical data on page 33 for the correct electrode gap.
- Spark plug and cylinder
- The spark plug is loose.
- Tighten the spark plug.
- Engine is flooded because of repeated starts with full choke after ignition.
- Remove and clean the spark plug.
- Put the product on its side with the spark plug hole away from you. Pull the starter rope handle 6-8 times. Assemble the spark plug and start the product. Refer to To start the product on page 13.
The engine starts but stops again 12 lines
Husqvarna sets this out as a table with the columns “Product part to examine”, “Possible cause”, “Action”. We print the lines in the maker’s order.
- Fuel tank
- Incorrect fuel type.
- Drain the fuel tank and fill with correct fuel.
- Carburetor
- The idle speed is not correct.
- Speak to your servicing dealer.
- Air filter
- Clogged air filter.
- Clean or replace the air filter.
- Fuel filter
- Clogged fuel filter.
- Replace the fuel filter.
Why we quote instead of rewriting. The manual is laid out as a table. Read by machine, a PDF loses the boundaries between columns, and pairing a symptom with the wrong remedy would give you a page that is confidently wrong rather than obviously broken. So we keep the maker’s order and words, and tell you how the table is built. The manual itself is linked further down.
Parts & prices
Every code below is Husqvarna’s own, read from the maker’s parts pages for this exact model. The code is printed on the part itself — on a label, moulded into the plastic or stamped in the metal. Read it off the broken part and type it here to find it straight away.
We hold no photograph of the individual parts: Husqvarna does not publish them, and we would rather say so than show you the wrong picture. Prices are the maker’s United States list prices on the day we read them — an order of magnitude, not a quote. The buttons search shops in your own country, and those shops pay us a commission.
Where to buy
The search opens in your own country’s shop, in that shop’s language, with our tracking — the shop pays us a commission, you pay the same price.
Tools you’ll need
Chosen for this family, not a generic list. Prices and availability come from the shop in your country, with our tracking.
Specifications
Copied field for field from the manufacturer’s own product page on 10 September 2026, in the maker’s units. We do not convert them: a rounded conversion is how a torque figure quietly becomes wrong.
Manuals & documents
We link the maker’s documents instead of re-hosting them, so you always open the version Husqvarna is publishing today.
Other machines in this family
Machines in the same family for which we also have the maker’s codes, prices and troubleshooting chapter. The whole family →
A polished page on our site: name, services, photos, contacts and area. Always online, always up to date, backed by our technical authority.
- Your professional showcase
- Present where people search — and cited by AIs
- 24/7 automatic assistant
- Bookings on Google Calendar
- Google reviews on show
- Optimization for AIs
Our sources
- Husqvarna support 15 specification fields and 15 parts with the maker’s code and list price, read on 10 September 2026.
- Operator's Manual Published: 7/23/2024 5.78 MB, EN, ES, FR 124 pages, read on 10 September 2026. The troubleshooting chapter quoted above. This document also covers 1 other model.
What is missing, said plainly. We hold no photograph of this exact machine, no repair times and no failure statistics — nobody publishes those honestly. Prices are Husqvarna’s United States list prices and will differ in your country. We are not a dealer: we do not stock parts, and the buttons search shops that pay us a commission.
TroubleAtlas Technical Team · Compiled from manufacturer documents read on 10 September 2026 · Last checked 26 September 2026 · How we verify