Husqvarna 570BFS: faults, parts & manual

🌐 ▾
Blowers & vacuums — Husqvarna

Home › Garden & power tools › Blowers & vacuums › Husqvarna 570BFS

Husqvarna

570BFS

Petrol leaf blower. Spare parts with Husqvarna’s own order codes, and the troubleshooting chapter of the operator’s manual.

Photograph: a leaf blower. We hold no photograph of this exact machine, and we would rather say so than pass one off.
The TroubleAtlas app on a phoneTROUBLEATLAS APP · FREEFREE APPDownload our free appDownload our free appOur shopping centre in your pocket: dozens of suppliers that deliver in your country, compared, department by department.Dozens of suppliers compared, in your country. Get it free Get it free

What actually breaks

Open the problem that matches yours. Everything inside comes from the troubleshooting chapter of the operator’s manual Husqvarna publishes for this model — a 68-page document we read on 10 September 2026.

The engine is not possible to start 27 lines

Husqvarna sets this out as a table with the columns “Check”, “Possible cause”, “Solution”. We print the lines in the maker’s order.

  • Stop button.
  • Stop position
  • Set the stop switch to the start position.
  • Starter pawl/s.
  • Blocked or worn starter pawl/s.
  • Adjust or replace the starter pawl/s.
  • Clean around the starter pawl/s.
  • Speak to an approved servicing dealer.
  • Fuel tank.
  • Incorrect fuel type.
  • Drain the fuel tank and use correct fuel.
  • Carburetor.
  • Adjustment of the idle speed.
  • Adjust the idle speed with the idle adjustment screw.
  • Spark (no spark).
  • Spark plug dirty or wet.
  • Make sure that the spark plug is dry and clean.
  • Electrode gap on the spark plug is incorrect.
  • Clean the spark plug. Make sure that the electrode gap is correct. Make sure that the spark plug is installed with a suppressor.
  • Refer to technical data for the correct electrode gap.
  • The engine is not possible to start
  • Spark plug.
  • Spark plug is loose.
  • Tighten the spark plug.
  • There is unwanted material on the spark plug electrodes.
  • Make sure that the fuel mixture is correct.
  • Make sure that the air filter is clean.
Engine starts but stops again 9 lines

Husqvarna sets this out as a table with the columns “Check”, “Possible cause”, “Solution”. We print the lines in the maker’s order.

  • Fuel tank.
  • Incorrect fuel type.
  • Drain it and use the correct fuel.
  • Carburetor.
  • Engine will not operate correctly at idle speed.
  • Speak to your servicing dealer.
  • Air filter.
  • Clogged air filter.
  • Clean the air filter.

Why we quote instead of rewriting. The manual is laid out as a table. Read by machine, a PDF loses the boundaries between columns, and pairing a symptom with the wrong remedy would give you a page that is confidently wrong rather than obviously broken. So we keep the maker’s order and words, and tell you how the table is built. The manual itself is linked further down.

Parts & prices

Every code below is Husqvarna’s own, read from the maker’s parts pages for this exact model. The code is printed on the part itself — on a label, moulded into the plastic or stamped in the metal. Read it off the broken part and type it here to find it straight away.

PAD
576625301
🛒 Find this part
CLIP
544270201
🛒 Find this part
SCREW CCRPANT
544270801
🛒 Find this part
CLIP
544270001
🛒 Find this part

We hold no photograph of the individual parts: Husqvarna does not publish them, and we would rather say so than show you the wrong picture. Prices are the maker’s United States list prices on the day we read them — an order of magnitude, not a quote. The buttons search shops in your own country, and those shops pay us a commission.

Where to buy

The search opens in your own country’s shop, in that shop’s language, with our tracking — the shop pays us a commission, you pay the same price.

TOOLS FOR THE JOB

Tools you’ll need

Chosen for this family, not a generic list. Prices and availability come from the shop in your country, with our tracking.

Specifications

Copied field for field from the manufacturer’s own product page on 10 September 2026, in the maker’s units. We do not convert them: a rounded conversion is how a torque figure quietly becomes wrong.

Cylinder displacement4 cu.inch
Output shaft power4 hp
Fuel tank volume2.2 l
Fuel Consumption431 g/kWh
Maximum power speed8,000 rpm
Idling speed2,000 rpm
Weight24.47 lbs
Air flow in housing972 cfm
Air flow in pipe768 cfm
Air speed (flat nozzle)202 mph
Air speed (round nozzle)236 mph
Max Blow force37 N
Air speed237.12 mph
Sound pressure level at operators ear103 dB(A)
Sound power level, guaranteed (LWA)110 dB(A)
Nozzle typeRound+ Flat
HarnessIntegrated
Vacuum KitNo
Equivalent vibration level (ahv, eq) handle5 m/s²

Manuals & documents

We link the maker’s documents instead of re-hosting them, so you always open the version Husqvarna is publishing today.

THE SAME BENCH

Other machines in this family

Machines in the same family for which we also have the maker’s codes, prices and troubleshooting chapter. The whole family →

Swipe for more →
◆ TROUBLEATLAS PRO

A polished page on our site: name, services, photos, contacts and area. Always online, always up to date, backed by our technical authority.

  • Your professional showcase
  • Present where people search — and cited by AIs
  • 24/7 automatic assistant
  • Bookings on Google Calendar
  • Google reviews on show
  • Optimization for AIs
TroubleAtlas Pro →
WHERE THIS COMES FROM, AND WHAT WE ARE MISSING

Our sources

What is missing, said plainly. We hold no photograph of this exact machine, no repair times and no failure statistics — nobody publishes those honestly. Prices are Husqvarna’s United States list prices and will differ in your country. We are not a dealer: we do not stock parts, and the buttons search shops that pay us a commission.

TroubleAtlas Technical Team · Compiled from manufacturer documents read on 10 September 2026 · Last checked 26 September 2026 · How we verify

Scroll to Top