tE6
What code tE6 means on a Kenmore tumble dryers, what causes it, and which part to check first.
● SEVERITY: HIGH
Kenmore tE6 means: Compressor outlet thermistor failure. The documented cause is: Unplug the dryer and check the compressor outlet thermistor wiring. Reconnect any loose wires. Replace the wire harness if damaged. Check the resistance of the compressor outlet thermistor.
What tE6 means
Compressor outlet thermistor failure
The display shows tE6 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the dryer and check the compressor outlet thermistor wiring |
| Reconnect any loose wires |
| Replace the wire harness if damaged |
| Check the resistance of the compressor outlet thermistor |
| It should measure about 10,000 ohms at room temperature |
| If the thermistor is defective, replace it |
| Replace the main control board if the compressor outlet thermistor and wiring are okay |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does tE6 mean on a Kenmore?
Compressor outlet thermistor failure The documented cause is: Unplug the dryer and check the compressor outlet thermistor wiring. Reconnect any loose wires. Replace the wire harness if damaged. Check the resistance of the compressor outlet thermistor. It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it. Replace the main control board if the compressor outlet thermistor and wiring are okay
Can I fix tE6 myself?
It depends on the part involved: Unplug the dryer and check the compressor outlet thermistor wiring. Reconnect any loose wires. Replace the wire harness if damaged. Check the resistance of the compressor outlet thermistor. It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it. Replace the main control board if the compressor outlet thermistor and wiring are okay Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Kenmore use other codes on this appliance?
Yes: we document 65 other codes for Kenmore on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.