Haier washing machines fault codes
Every Haier washing machines fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 15 codes documented
Haier uses 15 fault codes on its washing machines, shown on the display when the machine stops — among them CLrF, E10, E13, EUAr, Err1. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Haier appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Haier codes
15 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| CLrF | Too much suds |
| E10 | Service required control board / communication fault |
| E13 | Drying fault on washer dryer models / lint buildup |
| EUAr | Communication failure between the display board and the power board |
| Err1 | Door lock fault machine not detecting door is closed and locked |
| Err2 | Drain fault water has failed to drain within the expected time |
| Err3 | Wash temperature sensor error NTC thermistor fault |
| Err4 | Overflow condition detected too much water in the drum |
| Err5 | Fill fault machine cannot detect that it has filled with enough water in time |
| Err6 | Heating fault water not reaching target temperature |
| Err7 | Motor error drive motor overheating or motor circuit fault |
| Err8 | Water level exceeds protective limit / service required |
| Err9 | Service required internal fault detected |
| PF | Supply voltage is less than 93 volts AC |
| Unb | Unbalanced load |