E2
What code E2 means on a Kenmore washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Kenmore E2 means: Stuck button. The documented cause is: A button on the control panel is stuck. Try to free the button. Press down directly on top of all keys on the control panel. If that doesn't free the stuck key, press down slightly off-center on all keys.
What E2 means
Stuck button
The display shows E2 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| A button on the control panel is stuck |
| Try to free the button |
| Press down directly on top of all keys on the control panel |
| If that doesn't free the stuck key, press down slightly off-center on all keys |
| If you can't free the button, replace the user interface control board (also called the Sub-PCB control board) |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E2 mean on a Kenmore?
Stuck button The documented cause is: A button on the control panel is stuck. Try to free the button. Press down directly on top of all keys on the control panel. If that doesn't free the stuck key, press down slightly off-center on all keys. If you can't free the button, replace the user interface control board (also called the Sub-PCB control board)
Can I fix E2 myself?
It depends on the part involved: A button on the control panel is stuck. Try to free the button. Press down directly on top of all keys on the control panel. If that doesn't free the stuck key, press down slightly off-center on all keys. If you can't free the button, replace the user interface control board (also called the Sub-PCB control board) Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Kenmore use other codes on this appliance?
Yes: we document 142 other codes for Kenmore on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.