E52
What code E52 means on a Kenmore washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Kenmore E52 means: Bad signal from the drive motor tachometer. The documented cause is: Unplug the washer and check the wire harness connections between the drive motor and the motor control board. Reconnect any loose wires or replace the wire harness if damaged.
What E52 means
Bad signal from the drive motor tachometer
The display shows E52 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the washer and check the wire harness connections between the drive motor and the motor control board |
| Reconnect any loose wires or replace the wire harness if damaged |
| Check the resistance through the tachometer on the drive motor using a multimeter |
| If you don't measure between 105 and 130 ohms, the tachometer is defective and you'll need to replace the drive motor |
| The tachometer is built into the drive motor and can't be replaced separately |
| If tachometer resistance is okay, replace the motor control board |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E52 mean on a Kenmore?
Bad signal from the drive motor tachometer The documented cause is: Unplug the washer and check the wire harness connections between the drive motor and the motor control board. Reconnect any loose wires or replace the wire harness if damaged. Check the resistance through the tachometer on the drive motor using a multimeter. If you don't measure between 105 and 130 ohms, the tachometer is defective and you'll need to replace the drive motor. The tachometer is built into the drive motor and can't be replaced separately. If tachometer resistance is okay, replace the motor control board
Can I fix E52 myself?
It depends on the part involved: Unplug the washer and check the wire harness connections between the drive motor and the motor control board. Reconnect any loose wires or replace the wire harness if damaged. Check the resistance through the tachometer on the drive motor using a multimeter. If you don't measure between 105 and 130 ohms, the tachometer is defective and you'll need to replace the drive motor. The tachometer is built into the drive motor and can't be replaced separately. If tachometer resistance is okay, replace the motor control board Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Kenmore use other codes on this appliance?
Yes: we document 142 other codes for Kenmore on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.