F8 E5
What code F8 E5 means on a Kenmore washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Kenmore F8 E5 means: Hot & cold fill hoses are reversed. The documented cause is: Check the fill hoses. If they are connected properly then the inlet water thermistor (temperature sensor) will probably need to be replaced. That component is part of the Inlet Water Valve Wire Harness
What F8 E5 means
Hot & cold fill hoses are reversed
The display shows F8 E5 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Check the fill hoses |
| If they are connected properly then the inlet water thermistor (temperature sensor) will probably need to be replaced |
| That component is part of the Inlet Water Valve Wire Harness |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does F8 E5 mean on a Kenmore?
Hot & cold fill hoses are reversed The documented cause is: Check the fill hoses. If they are connected properly then the inlet water thermistor (temperature sensor) will probably need to be replaced. That component is part of the Inlet Water Valve Wire Harness
Can I fix F8 E5 myself?
It depends on the part involved: Check the fill hoses. If they are connected properly then the inlet water thermistor (temperature sensor) will probably need to be replaced. That component is part of the Inlet Water Valve Wire Harness Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Kenmore use other codes on this appliance?
Yes: we document 142 other codes for Kenmore on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.