Electrolux dishwashers fault codes
Every Electrolux dishwashers fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 21 codes documented
Electrolux uses 21 fault codes on its dishwashers, shown on the display when the machine stops — among them Er-01, Er-02, Er-03, Er-06, Er-08. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Electrolux appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Electrolux codes
21 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| Er-01 | Water leak detected |
| Er-02 | Thermistor/turbidity sensor failure |
| Er-03 | Wash motor failure |
| Er-06 | Lower fan failure |
| Er-08 | User interface control failure |
| Er-09 | Communication failure between the user interface control and the electronic control board |
| Er-10 | Electronic control board relay failure |
| Er-12 | Drain valve position error |
| Er-13 | Electronic control board failure |
| i10 | The dishwasher is not filling: the required water level is not reached during the maximum time |
| i20 | The system is failing to drain dirty water. After the maximum time, the water level switch hasn't signaled… |
| i30 | The float sensor of the "Aqua-Stop" system has sent a signal indicating a leak |
| i50 | No information is received from the triac of the circulation pump motor, possibly due to a short circuit |
| i60 | The water is not heated or is heated very slowly or, conversely, overheated |
| i70 | The resistance of the NTC sensor is out of range |
| i80 | Missing or unstable data exchange between the microprocessor and the EEPROM |
| i90 | The hash total of the dishwasher configuration is wrong |
| iA0 | An arm cannot rotate properly |
| iB0 | The turbidity sensor is faulty |
| iF0 | iF0 error code or fourteen blinks of an indicator means exceeding the time limit in the process of filling a… |
| iF01 | The water hasn't filled the basin to the prescribed level during the washing stage requiring some extra water |